Module 5 (M5) - Geometry and measures - Constructions using a ruler and a protractor

Constructions using a ruler and a protractor

It might be useful to look at M1 Properties of Angles and M1 Properties of 2D shapes.

Constructions are accurate drawings of shapes using a ruler and protractor.
From a sketch or a description, you may be asked to construct a triangle

How to construct triangles given 1 side and 2 angles

This video can not be played

To play this video you need to enable JavaScript in your browser.

Step by step instructions

Skip image gallery

Image caption,
What you need: ruler, protractor, pencil and paper.
Use these to construct a triangle when you know the length of 1 side and the 2 angles at each end of it.
In this case use the length 8 cm, and the two angles 40° and 50°.
Image caption,
Step 1:
Draw an 8 cm line using a pencil and ruler.
Place the centre of the protractor on the end of the line and mark 40° with a dot.
Image caption,
Step 2:
Use a ruler to draw a line from the end of the line through the dot and label the angle 40°.
TIP: you won't know the exact length of this new side yet so draw it a bit longer than you think you'll need. You can always extend it later.
Image caption,
Step 3:
Place the protractor on the other end of the first line and mark a 50° angle up from the line with a dot.
TIP: often protractors have an inner and outer scale. Make sure you read the one that has zero on the first line.
Image caption,
Step 4:
Draw a line from the end of the line through the dot so it crosses the other side. Extend the lines if you need to.
Mark this angle 50°.

You've constructed a triangle, given the length of 1 side and 2 angles.
TIP: if one of of the 2 angles is NOT at the end of the side you're given, it's easy to work out the third angle using the fact that there are 180° in a triangle.

How to construct triangles given 2 sides and 1 angle

This video can not be played

To play this video you need to enable JavaScript in your browser.

Step by step instructions

Skip image gallery

Image caption,
What you need: ruler, protractor, compass, pencil and paper.
Use these to construct a triangle when you know the length of 2 sides and 1 angle
In this case use 2 side lengths of 7 cm and 8 cm and the angle 40°.
Image caption,
Step 1:
Draw a straight 8 cm line using a pencil and ruler.
Set the compass width to 7 cm. Place the compass at one end of the line and draw an arc.
Image caption,
Step 2:
Centre the protractor on the same end of the line and make a dot at 40°.
From the same end, use a ruler to draw a line through the dot, crossing the arc.
Label the length 7 cm and the angle 40°.
Image caption,
Step 3:
Use the ruler to join the other end of the horizontal line to the end of the side you have just drawn.

You've constructed a triangle after being told 1 angle and the length of 2 sides.

How to construct triangles given 3 sides

This video can not be played

To play this video you need to enable JavaScript in your browser.

Step by step instructions

Skip image gallery

Image caption,
What you need: Ruler, pencil, compass, paper
Use these to construct a triangle when you know the length of all 3 sides.
In this case use the lengths 8 cm, 4 cm and 5 cm.
Image caption,
Step 1:
Draw a straight 8 cm line using a pencil and ruler.
Set the compass width to 4 cm. Place the compass at one end of the horizontal line and draw an arc.
Image caption,
Step 2:
Set the compass width to 5 cm.
Place the compass at the other end of the line and draw an arc that crosses the first arc.
Image caption,
Step 3:
Use the ruler to draw a line from the left end of the horizontal line to the point where the two arcs meet. Label the line 4 cm.
Image caption,
Step 4:
Use a ruler to join the other end of the line to the point where the two arcs meet. Label the line 5 cm.

You've constructed a triangle after being told the length of all 3 sides.

�鶹Լ��

Module 5 (M5) - Geometry and measures - Constructions using a ruler and a protractor

Constructions using a ruler and a protractor

How to construct triangles given 1 side and 2 angles

Step by step instructions

How to construct triangles given 2 sides and 1 angle

Step by step instructions

How to construct triangles given 3 sides

Step by step instructions

More on M5: Geometry and measures