DAB reception problems can be caused by many things. It is often a process of elimination to find the cause.
If the sound begins to burble or cut out altogether or you have lost a radio station it is probably due to one of the following: the signal has weakened due to a network fault or there’s a problem with your equipment or installation.
Transmitter faults
By using our Transmitter Checker, you can check whichDAB radio services are available at your location. It will also show you any transmitter faults.Currently it reports on network DAB stations only; Local and Nationsradio faults are not included.
Works and Warnings
Check whether there are any known works or warnings that might be causing the problem.
Tuning
DAB uses multiplexes to group services together.The 鶹Լ network stations, e.g. 鶹Լ Radio 1, 鶹Լ Radio 4are grouped together in a single multiplex. Nations and Local radio services are carried on a mix of commercial multiplexes.
Try switching your radio on and off.If you still have a problem use the ‘autotune' function to re-tune. If this does not work, a full re-scan might be needed.Checkyour radio manual for specific instructions on doing a full re-scan. Further information on tuning your DAB radio can be found by visiting the site or see ourDAB tuning guide.
Portable Radios
Ensure the telescopic/integrated aerial is fully extended. Try moving the radio around to see if you can find a better position where you get good reception of all the stations you want to listen to.
In most circumstances the supplied telescopic aerial should be perfectly adequate, and as a rule of thumb DAB aerials tend to work best when vertical and extended at least 35 cm. If your radio reception is poorthen you could consideran external aerial for best reception quality. Even in good areas an external aerial will guarantee optimum performanceand will also ensure consistent listening quality.
Many Digital radios have a signal strength display which enables you to position the Radio for the best reception (usually a number of blocks) as a guide of reception quality. Unfortunately, some radios are less sensitive than others and need careful positioning to work reliably. If your radio displays signal strength, use this as a guide to ensure the best position.
Our DAB installation guide provides further information.
External aerials
It is important to check the cables and the aerial for damageand that they are operating correctly.Make sure any cables between your radio equipment and aerial are connected securely. For further information see our DAB installation guide.
Damaged Cables
Water can get into external cables and can cause reception problems. To rule this out see our guide on water damage to cables.
Car Radios
Radio reception can drop out when on the movedue to changes in topography. See ourcar radio guidefor more information.
Weather
Radio signals can be affected by fine weather including high pressure. The only solution is to wait for the weather to change, you should not re-tune during this time. Our information on how clear skies and fine weather can affect your radio receptionmay be useful, please see our weather guide.
Lost reception of one or more station within a multiplex
If all other stations are working ok and you have just lost one station. The problem could be due to a number of reasons, the station may have stopped broadcasting or have moved multiplexes rather than a radio fault. Allof the stations in one multiplex should be behaving the same way.
Interference
If you are still having problems, it is possible an unwanted signal is the cause. For information on the .
Qualified Installer
The 鶹Լ cannot recommend individual installers. The is a recognised trade body which will be able to put you in touch with one of their members in your area.
